- 您现在的位置：买卖IC网 > Sheet目录499 > PD333-3C/H0/L2 (Everlight Electronics Co Ltd)PHOTODIODE PIN IR 5MM CLEAR
DATASHEET
5mm Silicon PIN Photodiode , T-1 3/4
PD333-3C/H0/L2
Although the recommended soldering conditions are specified in the above table, dip or hand soldering at the lowest
possible temperature is desirable for the LEDs.
?
Wave soldering parameter must be set and maintain according to recommended temperature and dwell time in the solder
wave.
4.
Cleaning
?
?
When necessary, cleaning should occur only with isopropyl alcohol at room temperature for a duration of no more than
one minute. Dry at room temperature before use.
Do not clean the LEDs by the ultrasonic. When it is absolutely necessary, the influence of ultrasonic cleaning on the LEDs
depends on factors such as ultrasonic power and the assembled condition. Ultrasonic cleaning shall be pre-qualified to
ensure this will not cause damage to the LED
5.
Heat Management
?
?
Heat management of LEDs must be taken into consideration during the design stage of LED application. The current
should be de-rated appropriately by referring to the de-rating curve found in each product specification.
The temperature surrounding the LED in the application should be controlled. Please refer to the data sheet de-rating
curve.
6.
ESD (Electrostatic Discharge)
?
?
?
?
Electrostatic discharge (ESD) or surge current (EOS) can damage LEDs.
An ESD wrist strap, ESD shoe strap or antistatic gloves must be worn whenever handling LEDs.
All devices, equipment and machinery must be properly grounded.
Use ion blower to neutralize the static charge which might have built up on surface of the LEDs plastic lens as a result of
friction between LEDs during storage and handing.
7.
Other
?
?
?
Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above
specification.
When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these
specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does
not comply
with the absolute maximum ratings and the instructions included in these specification sheets.
These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t
reproduce or cause anyone to reproduce them without EVERLIGHT’s consent.
Release Date:2013-05-30
10:50:50.0
www.everlight.com
9 : 3
Revision Copyright ?
LifecyclePhase:
2010, Everlight All Rights Reserved. Release Date : May.27.2013. Issue No: DPD-0000154
Expired Period: Forever
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
PD42-21B/TR8
PHOTODIODE PIN IR 1.8MM RND BK
PD42-21C/TR8
PHOTODIODE PIN IR 1.8MM RND CLR
PD438B
PHOTODIODE PIN IR 4.8MM CYL BK
PD438C/S46
PHOTODIODE PIN IR 4.8MM CYL CLR
PD438C
PHOTODIODE PIN IR 4.8MM CYL CLR
PD4859J5050S2HF
POWER DIVIDER 4800-5900MHZ 0805
PD6080J5050S2HF
POWER DIVIDER 6000-8000MHZ 0805
PD638B
PHOTODIODE PIN IR FLAT SIDE BK
相关代理商/技术参数
PD333-3C2
制造商:EVERLIGHT 制造商全称:Everlight Electronics Co., Ltd 功能描述:5mm Silicon PIN Photosiode, T-1 3/4
PD333-3C-H0-L2
制造商:EVERLIGHT 制造商全称:Everlight Electronics Co., Ltd 功能描述:5mm Silicon PIN Photodiode , T-1 3/4
PD333-3H0
制造商:EVERLIGHT 制造商全称:Everlight Electronics Co., Ltd 功能描述:5mm Silicon PIN Photodiode , T-1 3/4
PD333-3L2
制造商:EVERLIGHT 制造商全称:Everlight Electronics Co., Ltd 功能描述:5mm Silicon PIN Photodiode , T-1 3/4
PD333-3L3
制造商:EVERLIGHT 制造商全称:Everlight Electronics Co., Ltd 功能描述:5mm Silicon PIN Photosiode, T-1 3/4
PD3340
制造商:OHIO BUCKEYE 功能描述:
PD3340MT102
制造商:SEI Stackpole Electronics Inc 功能描述:Ind Power Unshielded Wirewound 1mH 20% 100KHz 800mA T/R
PD3340MT221
制造商:SEI Stackpole Electronics Inc 功能描述:Ind Power Unshielded Wirewound 220uH 20% 100KHz 1.6A T/R